If the issue persists, consult the keypad’s manual or contact Genie customer support for further assistance. Then, reinsert the batteries and try programming again. Test by entering the PIN and pressing the UP/DOWN arrow key once. Reset the keypad by removing the batteries for a few minutes.

While the purple light is blinking (30 seconds), go to the keypad, enter the new code you programmed into the keypad, and slowly press and release the UP/DOWN arrow key several times until the door activates.Upon releasing the square button, the blue light will turn off and the long purple button will start to blink. This is a detailed explanation of how to reset the pin and reprogram your genie Intellicode garage door opener keypad.Press and hold the square PROGRAM button (shown in the diagram above) located on the bottom of the motor head, until the round LED turns blue and release the button.Enter your PIN ( from three to eight characters).Test by entering your PIN and pressing the UP/DOWN arrow key once.Wait 30 seconds until the LED turns off.On the wireless keypad, enter your PIN and press the UP/DOWN arrow key 3, 4, or 5 times until the door activates.Use an existing remote to unlock the system by pressing it once only. Genie GK-BX Keyless Entry Instructions Intellicode access security system provides state-of-the-art, rolling-code technology for security by automatically.Press the square PROGRAM button and release again.(Note: If the round, blue LED turns off and the long, purple light starts blinking, go to the instructions for Intellicode 2 below.) Press and hold the square PROGRAM button located on the bottom of the motor unit, until both the round and cylindrical LEDs turn blue.If your door opener does not have an antenna, you have an external receiver, and you'll need to remove the external receiver cover to find the LEARN CODE button and the indicator LED. It is usually behind the light bulb cover, close to the antenna wire. Find the LEARN CODE button and the LED indicator light on your Genie motor unit inside the garage.12: Ryobi openers manufactured from 2016 to present.11: Sommer openers manufactured from 2013 to present.10: Xtreme Garage openers manufactured from 2016 to present.9: Wayne Dalton openers manufactured from 1999 to present.8: Chamberlain, Sears Craftsman, and LiftMaster openers manufactured from 2011 to present (Yellow “Learn” button).7: Stanley garage door openers manufactured from 1998 to present.

6: Genie Intellicode and Overhead Door openers manufactured from 1995 to present.

5: Genie Intellicode and Overhead Door openers manufactured from 2005 to present.

4: Chamberlain, Sears Craftsman, LiftMaster, Master Mechanic, and Do It openers manufactured from 1993 to 1996 (Green “Learn” button).

3: Chamberlain, Sears Craftsman, LiftMaster, Master Mechanic, and Do It openers manufactured from 2005 to present (Purple “Learn” button).

2: Chamberlain, Sears Craftsman, LiftMaster, Master Mechanic, and Do It openers manufactured from 1997 to 2004 (Orange/Red “Learn” button).

The manufacturer of the keypad, the date, and/or the color of the button indicates what unit code number to enter later: X Research source Unscrew or unclip the light cover on your LiftMaster motor and look at the color of the “Learn” button and the manufacturing date. How to program a genie garage door opener keypad diy tips. Find your unit code information under the light cover on your motor. 32 Likes, TikTok video from TheGuyOfAllTrades (theguyofalltrades): How to program.

Reset genie intellicode keypad